Fault codes / GE Profile AC / Blank display
GE Profile AC: Blank display
What it means: No 12 V at the stat.
What to check
12 V and ground at the 3-wire plug; the stat is fed from the control box.
Learn the system
Practice it on a service call
Guided diagnosis
Other GE Profile AC codes
- GE Profile AC code F1 Freeze sensor open or reading below -22°F
- GE Profile AC code F2 Freeze sensor shorted, or reading above 149°F
- GE Profile AC code F3 Outdoor coil sensor open (heat pump models)
- GE Profile AC code F4 Outdoor coil sensor shorted (heat pump models)
- GE Profile AC code F5 Outdoor temperature sensor open, or DIP switch 1 ON on a cool-only unit
- GE Profile AC code F6 Outdoor temperature sensor shorted (heat pump models)
- GE Profile AC code F7 The stat's own room sensor open
- GE Profile AC code F8 The stat's own room sensor shorted
- GE Profile AC code FC No communication with the main board: the comms (signal) wire open or shorted
- GE Profile AC code Lo 12 V under 10.5 V: the stat drops to OFF
- GE Profile AC: Snowflake flashing Indoor coil near freezing: compressor off, fan on
- GE Profile AC: Heat pump icon flashing with 32 Outdoor temperature under the heat pump lockout
- GE Profile AC: Heat pump icon flashing with 99 Indoor coil over 135°F: compressor off
Full field guide: GE Profile RV air conditioner and RARWT thermostat
Codes come from the maker manuals and public service sheets. Your model's own chart always wins, and LP and 120 volt work belongs to a qualified technician.