Fault codes / Lippert slide / 4

Lippert slide code 4

What it means: High battery.

What to check

Check the charger or converter output.

Tech detail

Above 18 V.

Learn the system

• How a slide room is built and carried
• Identify the slide system in a minute
• The in-wall controller: versions and fault codes
• Ball-screw actuator slides: clutch, stops, diagnosis

Practice it on a service call

• Slide stalls halfway out
• Slide comes in crooked
• Hydraulic slide crawls and stops

Guided diagnosis

• Slide-Outs
• Leveling Jacks

Other Lippert slide codes

• Lippert slide code 2 Battery drop out
• Lippert slide code 3 Low battery
• Lippert slide code 5 Excessive motor current
• Lippert slide code 6 Motor short circuit
• Lippert slide code 8 Hall signal not present
• Lippert slide code 9 Hall power short to ground
• Lippert slide: No move Room does not move when the switch is pressed
• Lippert slide: Runs no move Motor runs but room does not move
• Lippert slide: Slow Motor runs but room is slow
• Lippert slide: Stall Room stalls mid travel

Full field guide: Lippert In-Wall and through-frame slide controller

Codes come from the maker manuals and public service sheets. Your model's own chart always wins, and LP and 120 volt work belongs to a qualified technician.