Fault codes / Lippert slide / NO MOVE
Lippert slide: No move
What it means: Room does not move when the switch is pressed.
What to check
Clear any obstruction. Check battery voltage, the fuse and the wiring for loose or corroded connectors.
Learn the system
- How a slide room is built and carried
- Identify the slide system in a minute
- The in-wall controller: versions and fault codes
- Ball-screw actuator slides: clutch, stops, diagnosis
Practice it on a service call
Guided diagnosis
Other Lippert slide codes
- Lippert slide code 2 Battery drop out
- Lippert slide code 3 Low battery
- Lippert slide code 4 High battery
- Lippert slide code 5 Excessive motor current
- Lippert slide code 6 Motor short circuit
- Lippert slide code 8 Hall signal not present
- Lippert slide code 9 Hall power short to ground
- Lippert slide: Runs no move Motor runs but room does not move
- Lippert slide: Slow Motor runs but room is slow
- Lippert slide: Stall Room stalls mid travel
Full field guide: Lippert In-Wall and through-frame slide controller
Codes come from the maker manuals and public service sheets. Your model's own chart always wins, and LP and 120 volt work belongs to a qualified technician.