Fault codes / Lippert slide / STALL

Lippert slide: Stall

What it means: Room stalls mid travel.

What to check

Crank the manual override a short distance, then retry the switch. Replace the actuator if that fails.

Learn the system

• How a slide room is built and carried
• Identify the slide system in a minute
• The in-wall controller: versions and fault codes
• Ball-screw actuator slides: clutch, stops, diagnosis

Practice it on a service call

• Slide stalls halfway out
• Slide comes in crooked
• Hydraulic slide crawls and stops

Guided diagnosis

• Slide-Outs
• Leveling Jacks

Other Lippert slide codes

• Lippert slide code 2 Battery drop out
• Lippert slide code 3 Low battery
• Lippert slide code 4 High battery
• Lippert slide code 5 Excessive motor current
• Lippert slide code 6 Motor short circuit
• Lippert slide code 8 Hall signal not present
• Lippert slide code 9 Hall power short to ground
• Lippert slide: No move Room does not move when the switch is pressed
• Lippert slide: Runs no move Motor runs but room does not move
• Lippert slide: Slow Motor runs but room is slow

Full field guide: Lippert In-Wall and through-frame slide controller

Codes come from the maker manuals and public service sheets. Your model's own chart always wins, and LP and 120 volt work belongs to a qualified technician.